Filter
Top Products
2-36
Cisco BBSM Hotspot 1.0 User Guide
78-15293-01
Chapter 2 Setting Up BBSM Hotspot
Feature Considerations
Administrators can configure multiple RADIUS accounting servers, which provides redundancy in case
the primary RADIUS server is not responding. As with RADIUS authentication servers, each server is
configured with a ranking. BBSM Hotspot attempts to send accounting packets to accounting servers
until an accounting response packet is successfully received. For each server, BBSM Hotspot attempts
to send accounting request packets up to three times if the server fails to respond.
Table 2-11 shows the RADIUS attributes and the packets in which they are sent from the BBSM Hotspot
server to the RADIUS server. Table 2-12 describes these attributes.
Table 2-11 RADIUS Access-Request and Accounting-Request Packets
Attribute No. Access-Request
Accounting-Request
Start Interim-Update Stop
User-Name 1X XXX
User-Password 2X
NAS-IP-Address 4X XXX
NAS-Port 5X XXX
Service-Type 6X XXX
Framed-Protocol 7X XXX
Framed-IP-Address 8X XXX
Vendor-Specific 26 XXX
Called-Station-ID 30X XXX
Calling-Station-ID 31X XXX
NAS-Identifier 32X XXX
Acct-Status-Type 40 XXX
Acct-Input-Octets 42 X
Acct-Output-Octets 43 X
Acct-Session-ID 44X XXX
Acct-Session-Time 46 X
Acct-Input-Packets 47 X
Acct-Output-Packets 48 X
Acct-Terminate-Cause 49 X
NAS-Port-Type 61X XXX