Filter
Top Products
27
2
Hardware Installation
Power-on Select
JP8 is used to select the method of powering on the system. If you
want the system to power-on whenever AC power comes in, set
JP8 pins 1 and 2 to On. If you want to use the power button, set
pins 2 and 3 to On.
Important:
If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set JP8 pins 1 and 2 to On.
2. The PWRON After PWR-Fail field must be set to "On". (In-
tegrated Peripherals submenu, Super I/O Device section of
the BIOS).
X
JP8
1-2 On:
Power-on via
AC power
2-3 On:
Power-on via
power button
(default)
1
3
2
1
3
2