Filter
Top Products
36
2
Hardware Installation
Universal Serial Bus Connectors
The system board supports 8 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals.
The 4 onboard USB 2.0/1.1 ports (Black) are at locations CN5
(USB 3-4) and CN6 (USB 1-2).
J13 (USB 5-6) and J14 (USB 7-8) allow you to connect 4 additional
USB 2.0/1.1 ports. The USB ports may be mounted on a card-edge
bracket. Install the card-edge bracket to an available slot at the rear
of the system chassis then insert the connector that is attached to
the USB port cables to J13 or J14.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
(“Onboard Device” section) of the BIOS. Refer to chapter 3 for
more information.
W
USB 4
USB 3
USB 2
USB 1
W
USB 5-6
USB 7-8
W
1
VCC
-Data
+Data
GND
Key
VCC
-Data
+Data
GND
N. C.
2
10
9