Filter
Top Products
34
2
Hardware Installation
The system board is equipped with an onboard IEEE 1394 port at
location CN6 (IEEE 1394_1) of the system board.
It is also equipped with an IEEE 1394 connector at location J5 (IEEE
1394_2) for connecting an additional 1394 device. The 1394 port
may come mounted on a card-edge bracket. Install the card-edge
bracket to an available slot at the rear of the system chassis then
insert the connector that is attached to the 1394 port cable to J5.
Make sure pin 1 of the cable connector is aligned with pin 1 of the
J5. You can now connect an IEEE 1394 device to the port.
1394_1
W
W
IEEE 1394
1394_2
+12V (fused)
1
TPA+
Ground
TPB+
+12V (fused)
Key
TPA-
Ground
TPB-
Ground
2
10
9