Filter
Top Products
Mitel SX-2000 Lightware
10
For the dialplan to be applied to inbound calls, click the Details button of the configured SIP peer and
configure the Address Normalization settings as in the screen below. This converts the phone number into
the E.164 format as needed by Microsoft
®
Office Communications Server 2007. Click OK on this page, and Save
on the next page for the changes to take effect.
5.2.4.2 Address Map Configuration Example
If the dialplan does not meet your setups special requirements, the Address Map Configuration can be
used. An address map entry uses regular expressions (RegEx) (so does Microsoft
®
Office Communications
Server 2007) for converting the call address format for inbound or/and outbound direction.
Important note before applying regular expression rules in address maps: The call address for outbound calls (IP
to TDM) includes a “@hostname” part. For example, +17166391234@DMG4000.bufocs.local
is the call address,
not just +17166391234. For inbound calls (TDM to IP), the call address is the called or calling number, with a
possible prefix “+”, “N”, or “S”. For example, an inbound call has called number 1234 with ISDN type of
numbering flag set to Subscriber, and the calling number 49715233334444 with ISDN type of numbering flag
set to International. The called address will be S1234 and the calling address will be +49715233334444.