Dialogic SX-2000 Network Card User Manual


 
Mitel SX-2000 Lightware
44
Note: Parameters not listed below can be left at their default settings.
Set Leading Digits to a currently unassigned ARS number.
Set Digits Dialed to an unused 2-digit string.
Set Number of Digits to Follow to 2.
Set Termination Type to Route.
Set Termination Number to 2.
Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
Press [ESC] then [Q] to return to the ARS Forms menu.
Continue to press [ESC] then [Q] until you are logged out of the system.
6.1.1.3 NSU Configuration/IMAT Programming
Step 1: Open up IMAT and create a new database as follows:
Select File > New Database.