Dialogic SX-2000 Network Card User Manual


 
Mitel SX-2000 Lightware
42
Note: Parameters not listed below can be left at their default settings.
Select an unused Route Number.
Set Trunk Group Number to the trunk group number defined in Step 11 of the SX-2000 Light
Administration.
Set COR Group Number to 1.
Set Digit Modification Number to the digital modification number defined in Step 2 of the Automatic
Route Selection.
Set Digits Before Outpulsing to 5.
Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
Press [ESC] then [Q] to return to the ARS Forms menu.