Dialogic SX-2000 Network Card User Manual


 
Dialogic
®
4000 Media Gateway Series Integration Note
47
Under Line Coding, select B8ZS.
Under Framing, select ESF.
Under Line Build Out, select 0 dB.
Under Invert Data, select Disable.
Click Update and Close.
Step 4: Configure the Incoming Call Characteristics as follows:
Select Config > Incoming Call Characteristics.
Set PRI link number* to the link number that the T1 QSIG is installed.
Set Trunks* to 1-23.
Set DDI Delivery to Yes.
Set CPN Delivery to Yes.
Click Update and Close.