Dialogic SX-2000 Network Card User Manual


 
Mitel SX-2000 Lightware
32
Note: Parameters not listed below can be left at their default settings.
Set Trunk Circuit Descriptor Number to an unused trunk circuit descriptor number.
Set Signaling Protocol to MSDN-DPNSS.
Set Dual Seizure Priority to Incoming.
Set Far End Connection to Local Office.
Set Card Type to Universal T1.
Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
Press [ESC] then [Q] to return to the Trunk Forms menu.