Filter
Top Products
Prometheus CPU User Manual V1.44 Page 17
The different configurations for J10 are shown below. Each illustration shows only the jumper of
interest. An asterisk (*) indicates the default setting.
5.2 J6: Watchdog Timer & System Recovery
J6 is used to configure the watchdog timer and enable system recovery (failsafe mode) in case of
BIOS corruption. This jumper has different dimensions than J10 and J13, and the jumpers are not
interchangeable.
Watchdog timer operation is described in detail on page 20.
Failsafe mode operation is described on page 21.