Prometheus CPU User Manual V1.44 Page 5
2. FEATURES
System Features
Processor Section
♦ 486-DX2 processor running at 100MHz with co-processor
♦ Pentium class platform including burst-mode SDRAM and PCI-based IDE controller and USB
♦ 32MB SDRAM system memory
♦ 50MHz memory bus for improved performance
♦ 2MB 16-bit wide integrated flash memory for BIOS and user programs
♦ 8KB unified level 1 cache
I/O
♦ 4 serial ports, 115.2kbaud max
♦ 2 ports 16550-compatible, 2 ports 16850-compatible with 128-byte FIFOs
♦ 2 full-featured powered USB ports
♦ 1 ECP-compatible parallel port
♦ Floppy drive connector
♦ IDE drive connector (44-pin version for notebook drives)
♦ Accepts solid-state flashdisk modules directly on board
♦ 100BaseT full-duplex PCI bus mastering Ethernet (100Mbps)
♦ IrDA port (requires external transceiver)
♦ PS/2 keyboard and mouse ports
♦ Speaker, LEDs
System Features
♦ Plug and play BIOS with IDE autodetection, 32-bit IDE access, and LBA support
♦ Built-in fail-safe boot ROM for system recovery in case of BIOS corruption
♦ User-selectable COM2 terminal mode
♦ On-board lithium backup battery for real-time-clock and CMOS RAM
♦ ATX power switching capability
♦ Programmable watchdog timer
♦ Power surge monitor for fail-safe operation
♦ Zero wait-state capability for flash memory and PC/104 bus
♦ +5V-only operation
♦ Extended temperature range operation (-40 to +85
o
C)
♦ Cable-free operation when used with Diamond Systems’ PNL-Z32 Panel I/O board