Filter
Top Products
Prometheus CPU User Manual V1.44 Page 70
25. I/O CABLES
When the panel I/O board PNL-Z32 is used, no cabling or wiring is required to operate the CPU
(unless you want to connect to an external IDE drive or floppy drive). However for custom
installations as well as development, Diamond Systems offers a cable kit no. C-PRZ-KIT with 9
cables to connect to all I/O headers on the board. Some cables are also available separately.
The mating cable for each I/O connector is listed in Chapter 4.
NOTE: When the multi-I/O cable C-PRZ-01 or any other cable is connected to serial ports 1 or 2,
the serial port signals must terminate to another board, or interference problems may occur that
will slow down the performance of your CPU.
Photo No. Cable No. Description
2 C-PRZ-01 80-wire / 2-cable breakout cable assembly with serial,
parallel, PS/2 mouse/keyboard, power, reset, speaker, &
LED connectors
6 C-PRZ-02 6-wire Ethernet cable with panel-mount RJ-45 connector
3 C-50-18 50-wire data acquisition cable
5 698004 44-wire IDE cable for 1 or 2 drives
7 698005 6-wire auxiliary serial port cable
8 698006 4-wire output power cable for external drives
4 698008 34-wire floppy cable for 1 or two drives
9 698009 9-wire input power cable with stripped/tinned leads for
connection to external power source
1 698012 Dual USB cable
Cable Kit C-PRZ-KIT