Filter
Top Products
Control Branch
7-153910-A2-GN32-40 September 1998
Press the key to move the cursor to the next position ( 9 ).
Select the F2 ( " ) key to change the number above the cursor ( 9 ) to 0.
F1
RSL High (-dBm)
Nxt " 10
F2
F3
NOTE
If you want to modify additional VF thresholds, select Nxt.
To save the edited threshold(s):
F1
RSL High (-dBm)
Nxt " 10
F2
F3
Press the key to scroll up to the Edit/Save screen.
F1
VF Thresholds
Edit Save Reset
F2
F3
Select Save.
If the edited VF thresholds are valid, the Save command stores them into nonvolatile memory.
When the Save completes, the message Save Completed appears.
F1
Save VF Thresh
Thd Out of Range
F2
F3
If the edited VF threshold is invalid (out of range), the error message Thd Out of Range
appears. This indicates the Save procedure was unsuccessful. Return to the Edit screen and
correct the invalid threshold range.