Filter
Top Products
Remote Branch
13-33910-A2-GN32-40 September 1998
For Trellis Multipoint (TMp) control modems, you must specify the network management
address of a tributary modem. The following display does not appear in point-to-point or
Trellis Multipoint tributary modems.
F1
Choose Address:
Ent "x
xx
F2
F3
The address field (xxx) displays the network management address of the modem to be accessed
by the Remote function. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
and keys to position the
cursor ( _ ) under the digit that will be incremented. Press the F2 ( " ) key to increment the digit.
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access
password of the modem that will be accessed by the Remote function. The following display
does not appear in point-to-point modems.
F1
Choose Password:
Ent "y
yyyyyyy
F2
F3
The password field (yyyyyyyy) displays the remote access password of the modem to be
accessed by the Remote function.
To increment digits within the password field (yyyyyyyy), use the
and keys to position
the cursor ( _ ) under the digit that will be incremented. Press the F2 ( " ) key to increment the
digit.
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
F1
Select Channel >
Secondary
F2
F3
or
F1
Select Channel <
Prim (data blckd)
F2
F3