Filter
Top Products
COMSPHERE 3900 Series Modems
12-8 September 1998 3910-A2-GN32-40
Table 12-1
(2 of 2)
Edit Password Table Group Options
H VF plus DTE
Indicates that both layers of password entry are used with this index’s password. This location is
configured so that the answering modem sends a prompt for the DTE-side password after receiving
a valid VF-side password. This setting requires that the Set Answer Security option be set to
VF_&_DTE.
NOTE: If the Set Answer Security option (Answer Security mode) is set to VF_&_DTE, special
requirements apply in order to use passwords with their type set to DTE_Entry. The originating
caller must first enter a valid VF password. If the VF password entered is configured in the security
database with the type VF_plus_DTE, the user is then required to enter a password configured in
the database table with the type DTE_Entry.
Edit PsWd xxxx
Nxt " yyyyyyyy or zzzzzz
This configuration option does not appear if Password Type is configured for Cleared.
Edit Password. Allows the password associated with this index to be changed.
H xxxx
Indicates the current index location value.
H yyyyyyyy
Indicates the current password value for this index. If the Password Type is VF_Entry or
VF_plus_DTE, then the password value is an 8-digit decimal number.
H zzzzzz
Indicates the current password value for this index. If Password Type is configured for DTE_Entry,
then the password value is a 6-character alphanumeric number.
Save Edit? xxxx
Edit Save Yes No
Save Edit. Saves any changes made in the EditPassWdTable group.
H xxxx
Indicates the current index field value.
H Edit
Returns the LCD to the Password Type option and does not save any changes made to the index or
password table.
H Save
Saves changes made to the index or Password Table. Once selected, the Select Index screen
appears and increments to the next index value.
H Yes No
Appears only if changes are made to any of the options within the Password Table and a menu
level key is pressed before reaching the Save Edit? option. After deciding whether or not to save
changes, the LCD displays Select Index and increments to the next index value.