Filter
Top Products
DFL-500 User Manual
4
2
Viewing the dynamic IP/MAC list
• Go to Firewall > IP/MAC Binding > Dynamic IP/MAC .
Enabling IP/MAC binding
• Go to Firewall > IP/MAC Binding > Setting .
• Select Enable IP/MAC binding going through the firewall to turn on IP/MAC binding for packets that
could be matched by policies.
•
Select Enable IP/MAC binding going to the firewall to turn on IP/MAC binding for packets connecting
to the firewall.
•
Configure how IP/MAC binding handles packets with IP and MAC addresses that are not defined in
the IP/MAC list.
Select Allow traffic to allow all packets with IP and MAC address pairs that are not added to the
IP/MAC list.
Select Block traffic to block packets with IP and MAC address pairs that are not added to the IP/MAC
binding list.
• Select Apply to save your changes.
IP/MAC settings