Filter
Top Products
DFL-500 User Manual
7
9
Example log settings
Selecting what to log
Use the following procedure to configure the type of information recorded in DFL-500 logs.
• Go to Log&Report > Log setting .
•
Select Log All Internal Traffic To Firewall to record all connections to the internal interface. This
setting is not available in Transparent mode.
• Select Log All External Traffic To Firewall to record all connections to the external interface. This
setting is not available in Transparent mode.
When the DFL-500 NPG is running in Transparent mode, you can select Log All Events.
Traffic logs are also recorded when you select Log Traffic for a firewall policy.
• Select Log All Events to record management and activity events in the event log.
Management events include changes to the system configuration as well as administrator and user
logins and logouts. Activity events include system activities, such as VPN tunnel establishment, web
content blocking, and so on.
• Select Apply to save your log settings.
Configuring alert email
You can configure the DFL-500 NPG to send alert email to up to three email addresses. You can enable
sending alert emails for firewall or VPN events or violations.
This section describes:
•
Configuring alert email
•
Testing alert email
•
Enabling alert email