Filter
Top Products
Using the Configuration Interface
26 D-Link Systems, Inc.
Wireless
The wireless section is used to configure the wireless settings for your D-Link Router. Please note
that changes made on this section may also need to be duplicated on your Wireless Client.
Basic Wireless Settings
This option turns off and on the wireless connection feature of the router.
If this is not enabled, you cannot connect using a wireless network
adapter.
When you are browsing for available wireless networks, this is the name
that will appear in the list (unless Visibility Status is set to Invisible, see
below). This name is also referred to as the SSID.
The Invisible option allows you to hide your wireless network. When this
option is set to Visible, your wireless network name is broadcast to anyone
within the range of your signal. If you’re not using encryption then they could
connect to your network. When Invisible mode is enabled, you must enter
the Wireless Network Name (SSID) manually to connect to the network.
With this box selected, the router will automatically choose the best
channel.
Select the channel with the clearest signal.
By default the transmission rate will automatically select the fastest rate.
You have the option of selecting the speed if necessary.
If all of your devices can connect in 802.11g Mode then leave the setting
at 802.11g only. If you have some devices that are 802.11b than you can
change the mode to Mixed.
Super G Turbo Modes must use channel 6 for transmission and 802.11
Mode must be set to 802.11g.
• Super G without Turbo: Performance enhancing features such as
Packet Bursting, FastFrames, and Compression.
• Super G with Static Turbo: Mode is not backwards compatible with
non-Turbo (legacy) devices. Static turbo mode is always on and is
only enabled when all devices on the wireless network are Super G
with Static Turbo enabled.
• Super G with Dynamic Turbo: Mode is backwards compatible with
non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all devices on the wireless network are Super G with Dynamic
Turbo enabled.
Enable Wireless
Radio:
Wireless Network
Name:
Visibility Status:
Auto Channel Select:
Channel:
Transmission Rate:
802.11 Mode:
Super G
™
Mode:
Basic > Wireless