Filter
Top Products
Using the Configuration Interface
34 D-Link Systems, Inc.
GameFuel
™
The GameFuel
™
option helps improve your network gaming performance by prioritizing applications. By
default the GameFuel settings are disabled and application priority is not classified automatically.
GameFuel
™
Setup
This option is disabled by default. Enable this option for better performance
and experience with online games and other interactive applications, such
as VoIP.
This option is enabled by default when the GameFuel option is enabled.
This option will allow your router to automatically determine which programs
should have network priority.
This option should be enabled when you have a slot Internet uplink. It helps
to reduce the impact that large low priority network packets can have on
more urgent ones.
This option is enabled by default when the GameFuel option is enabled.
This option will allow your router to automatically determine the uplink speed
of your Internet connection.
This displays the detected uplink speed.
The speed at which data can be transferred from the router to your ISP.
This is determined by your ISP. ISP’s often speed as a download/upload
pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter
284. Alternatively you can test your uplink speed with a service such as
www.dslreports.com.
By default, the router automatically determines whether the underlying
connection is an xDSL/Frame-relay network or some other connection type
(such as cable modem or Ethernet), and it displays the result as Detected
xDSL or Frame Relay Network. If you have an unusual network connection
in which you are actually connected via xDSL but for which you configure
either “Static” or “DHCP” in the WAN settings, setting this option to xDSL
or Other Frame Relay Network ensures that the router will recognize
that it needs to shape traffic slightly differently in order to give the best
performance. Choosing xDSL or Other Frame Relay Network causes the
measured uplink speed to be reported slightly lower than before on such
connections, but gives much better results.
When Connection Type is set to automatic, the automatically detected
connection type is displayed here.
Enable GameFuel:
Automatic
Classification:
Dynamic
Fragmentation:
Automatic Uplink
Speed:
Measured Uplink Speed:
Uplink Speed:
Connection Type:
Detected XDSL or
other Frame Relay
Network:
Advanced > GameFuel