Filter
Top Products
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Example usage:
To display RADIUS settings on the Switch:
DES-6500:4#show radius
Command: show radius
Idx IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active des3226
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DES-6500:4#
show acct_client
Purpose Used to display the current RADIUS accounting client.
Syntax
show acct_client
Description
The show acct_client command is used to display the current
RADIUS accounting client currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the current RADIUS accounting client:
DES-6500:4#show acct_client
Command: show acct_client
radiusAcctClient
---------------------------------------------------------------------------------------
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier D-Link
radiusAccClientRequests 0
radiusAccClientMalformedResponses 0
radiusAccClientTimeouts 0
radiusAuthServerEntry 0
---------------------------------------------------------------------------------------
radiusAccServerIndex 1
radiusAccServerAddress 10.53.13.199
radiusAccClientServerPortNumber 0
radiusAccClientRoundTripTime 0
radiusAccClientRetransmissions 0
radiusAccClientResponses 0
radiusAccClientBadAuthenticators 0
radiusAccClientPendingRequests 0
radiusAccClientUnknownTypes 0
radiusAccClientPacketsDropped 0
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
204