Filter
Top Products
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
Command Parameters
create access_profile profile_id <value 1-8> [ethernet {vlan | source_mac <macmask> |
destination_mac <macmask> | 802.1p | ethernet_type}
config access_profile
profile_id
<value 1-8> [add access_id <value 1-65535> [ethernet {vlan
<vlan_name 32> | source_mac <macaddr> | destination_mac
<macaddr> | 802.1p <value 0-7> | ethernet_type <hex 0x0-0xffff>}
port <port> [permit {priority <value 0-7> {replace_priority} |
replace_dscp <value 0-63>} | deny] delete <value 1-65535>
create access_profile profile_id <value 1-8> ip {vlan | source_ip_mask <netmask> |
destination_ip_mask <netmask> | dscp | [icmp {type | code} | igmp
{type} | tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex
0x0-0xffff> | flag_mask [all | {urg | ack | psh | rst | syn | fin}]} | udp
{src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-xffff>}
| protocol_id {user _mask <hex 0x0-0xffffffff> }]}
config access_profile
profile_id
<value 1-8> [add access_id <value 1-65535> ip {vlan <vlan_name
32> | source_ip <ipaddr> | destination_ip <ipaddr> | dscp <value
0-63> | [icmp {type <value 0-255> | code <value 0-255>} | igmp
{type <value 0-255>} | tcp {src_port <value 0-65535> | dst_port
<value 0-65535> | urg | ack | psh | rst | syn | fin} | udp {src_port
<value 0-65535> | dst_port <value 0-65535>} | protocol_id <value
0 - 255> {user_define <hex 0x0-0xffffffff> }]} port <port> [permit
{priority <value 0-7> {replace_priority} | replace_dscp <value 0-
63>} | deny] delete <value 1-65535>]
create access_profile profile_id <value 1-8>packet_content_mask {offset_0-15 <hex
0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> | offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff>}
config access_profile
profile_id
<value 1-8> [add access_id <value 1-65535> packet_content
{offset_0-15 <hex0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_16-31 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> |
offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff><hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> |
offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex0x0-0xffffffff>} port <port> [permit {priority <value 0-
7> {replace_priority} | replace_dscp <value 0-63>} | deny] delete
<value 1-65535>]
create access_profile profile_id <value 1-8> ipv6 {class | flowlabel | source_ipv6_mask
<ipv6mask> | destination_ipv6_mask <ipv6mask>}]
config access_profile
profile_id
<value 1-8> add access_id <value 1-65535> ipv6 {class <value 0-
255> | flowlabel <hex 0x0-0xfffff> | source_ipv6 <ipv6addr> |
destionation_ipv6 <ipv6addr>} port <port> [permit {priority <value
0-7> {replace_priority}} | deny] | delete <value 1-65535>]
Each command is listed, in detail, in the following sections.
212