Filter
Top Products
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
create cpu access_profile
• dst_port_mask <hex 0x0-0xffff> − Specifies a UDP port mask for
the destination port.
• protocol_id − Specifies that the Switch will examine each frame’s
Protocol ID field.
• user_define_mask <hex 0x0-0xffffffff> − Specifies that the rule
applies to the IP protocol ID and the mask options behind the IP
header.
• packet_content_mask – Specifies that the switch will mask the
packet header beginning with the offset value specified as follows:
• offset_0-15 - Enter a value in hex form to mask the packet from
byte 0 to byte 15.
• offset_16-31 - Enter a value in hex form to mask the packet from
byte 16 to byte 31.
• offset_32-47 - Enter a value in hex form to mask the packet from
byte 32 to byte 47.
• offset_48-63 - Enter a value in hex form to mask the packet from
byte 48 to byte 63.
• offset_64-79 - Enter a value in hex form to mask the packet from
byte 64 to byte 79.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a cpu access profile:
DES-6500:4#create cpu access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code permit profile_id 1
Command: create cpu access_profile ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code permit profile_id 1
Success.
DES-6500:4#
delete cpu access_profile
Purpose Used to delete a previously created access profile or cpu access profile.
Syntax
delete cpu access_profile profile_id <value 1-5>
Description
The delete cpu access_profile command is used to delete a previously
created cpu access profile.
Parameters
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to
identify the cpu access profile to be deleted with this command. This value
is assigned to the access profile when it is created with the create cpu
access_profile command.
Restrictions Only administrator-level users can issue this command.
Example usage:
229