Filter
Top Products
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
show packet ports
Parameters
<portlist> − Specifies a range of ports to be displayed. The port list
is specified by listing the lowest slot number and the beginning
port number on that slot, separated by a colon. Then the highest
slot number, and the highest port number of the range (also
separated by a colon) are specified. The beginning and end of the
port list range are separated by a dash. For example, 1:3 specifies
slot number 1, port 3. 2:4 specifies slot number 2, port 4. 1:3-2:4
specifies all of the ports between slot 1, port 3 and slot 2, port 4 −
in numerical order.
Restrictions None.
Example usage:
To display the packets analysis for port 7 of module 2:
DES-6500:4#show packet port 2:7
Command: show packet port 2:7
Port number : 2:7
(A) (B)
Frame Size Frame Counts Frames/sec Frame Type Total Total/sec
------------ ------------ ---------- ---------- ------- ---------
64 3275 10 RX Bytes 408973 1657
65-127 755 10 RX Frames 4395 19
128-255 316 1
256-511 145 0 TX Bytes 7918 178
512-1023 15 0 TX Frames 111 2
1024-1518 0 0
(C)
Unicast RX 152 1
Multicast RX 557 2
Broadcast RX 3686 16
L3 Unicast RX 0 0
L3 Unicast TX 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show error ports
Purpose Used to display the error statistics for a range of ports.
Syntax
show error ports <portlist>
Description This command will display all of the packet error statistics
collected and logged by the Switch for a given port list.
Parameters
<portlist> − Specifies a range of ports to be displayed. The port
list is specified by listing the lowest slot number and the
beginning port number on that slot, separated by a colon. Then
the highest slot number, and the highest port number of the
range (also separated by a colon) are specified. The beginning
and end of the port list range are separated by a dash. For
example, 1:3 specifies slot number 1, port 3. 2:4 specifies slot
number 2, port 4. 1:3-2:4 specifies all of the ports between slot 1,
port 3 and slot 2, port 4 − in numerical order.
Restrictions None.
59