Filter
Top Products
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
To configure SNTP settings:
DES-6500:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DES-6500:4#
show sntp
Purpose
show sntp
This command will display SNTP settings information including the
source IP address, time and poll interval.
Parameters None.
Only administrator-level users can issue this command.
Used to display the SNTP information.
Syntax
Description
Restrictions
Example usage:
To display SNTP configuration information:
DES-6500:4#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server : 10.1.1.1
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval : 720 sec
DES-6500:4#
enable sntp
Purpose Enables SNTP server support.
Syntax
enable sntp
Description This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP
support will override any manually configured system time
settings.
Parameters None.
Restrictions Only administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
Example usage:
To enable the SNTP function:
252