Filter
Top Products
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
DES-6500:4#config pim ipif System hello 35 jp_interval 70 state enabled
Command: config pim ipif System hello 35 jp_interval 70 state enabled
Success.
DES-6500:4#
enable pim
Purpose Used to enable PIM function on the Switch.
Syntax
enable pim
Description This command will enable PIM for the Switch. PIM settings must first
be configured for specific IP interfaces using the config pim
command.
Only administrator-level users can use this command.
Parameters None.
Restrictions
Usage Example:
To enable PIM as previously configured on the Switch:
DES-6500:4#enable pim
Command: enable pim
Success.
DES-6500:4#
disable pim
Purpose Used to disable PIM function on the Switch.
Syntax
disable pim
Description This command will disable PIM for the Switch. Any previously
configured PIM settings will remain unchanged and may be enabled
at a later time with the enable pim command.
Parameters None.
Restrictions Only administrator-level users can use this command.
Usage Example:
To disable PIM on the Switch:
DES-6500:4#disable pim
Command: disable pim
Success.
DES-6500:4#
296