Filter
Top Products
Setting up your wireless router
49
3 If Specify an IP address is selected, your router will need to be set up for a static IP
connection type. Write down the address information in the table below. You will
need to enter this information into your router.
• Write in the IP address and subnet mask from the IP Address tab (3).
•Click the Gateway tab (2). Write the gateway address down in the table.
•Click the DNS Configuration tab (1). Write the DNS address(es) in the table.
4 If not already selected, click Obtain IP address automatically in the IP Address
tab, then click OK.
5 Restart the computer. When the computer restarts, your network adapter(s) are now
configured for use with your router.
Mac OS up to 9.x
To manually configure network adapters in Mac OS up to 9.x:
1 Pull down the Apple menu. Select Control Panels and select TCP/IP. The TCP/IP
control panel opens.
2 Select Ethernet Built-In or Ethernet in the Connect via drop-down menu (1).