Filter
Top Products
52
Setting up your wireless router
4 Select the TCP/IP tab (3). Next to Configure (4), you should see Manually or Using
DHCP. If you do not, check the PPPoE tab (5) to make sure that Connect using
PPPoE is NOT selected. If it is, you will need to configure your router for a PPPoE
connection type using your user name and password.
5 If Manually is selected, your router will need to be set up for a static IP connection
type. Write the address information in the table below. You will need to enter this
information into your router.
6 If not already selected, select Using DHCP next to Configure (4), then click Apply
Now. Your network settings are now configured for use with your router.
Recommended Web browser settings
In most cases, you will not need to make any changes to your Web browser's settings. If you
are having trouble accessing the Internet or the Web-Based Advanced User Interface, then
change your browser's settings to the recommended settings in this section.