Echo LANlink Router Option User Manual Issue 1.0 04 December 1997 Page 11 of 59
2.4 Router Management
Selecting ROUTER MANAGEMENT from the main menu allows the user to
configure the router. The router management screen is shown in Figure 5.
Refer to Section 4 for details on each menu option.
+-------------------------------------------------------------------------------+
| ROUTER: S1234 EXIT |
+-------------------------------------------------------------------------------+
UNIT STATUS
TRAFFIC ANALYSIS
NETWORK LOADING
REMOTE MANAGEMENT
UNIT CONFIGURATION
SERVICE SETUP
FILTER SETUP
EVENTS
Figure 5 Router Management Screen
2.4.1 General Keyboard Conventions
The following keys are used to navigate the configuration screens for the
router management.
Moves the cursor block to the right
Moves the cursor block to the left
Moves the cursor block upwards
Moves the cursor block downwards
<return> selects/initiates the highlighted option
2.4.2 Parameter Selection
When a command is selected from the command line using the cursor,
pressing <return> will initiate action.
Some commands require the user to enter data. In Figure 6, a user has
selected to ADD a new WAN IP filter. A new line has appeared allowing the
user to enter the source IP address for the WAN filter. In this case, type in the
required value using the keyboard and press <return>. Press <esc> to
cancel any data entry operation