Filter
Top Products
Echo LANlink Router Option User Manual Issue 1.0 04 December 1997 Page 22 of 59
3.7.2.11 Receive IPX RIP
Set this field to YES to receive IPX RIP responses from other routers or
servers on the local network.
3.7.2.12 Transmit IPX RIP
Set this field to YES to transmit regular IPX RIP responses to other routers or
servers on the local network. If set to NO, IPX RIP responses will only be
sent as a result of receiving a RIP request.
3.7.2.13 Receive IPX SAP
Set this field to YES if you wish to receive IPX SAP responses from other
routers or servers on the local network. Requests are still received and
replied to.
3.7.2.14 Transmit IPX SAP
Set to YES to allow transmission of regular IPX SAP responses to other
routers or servers on the local network. If set to NO, IPX SAP responses will
only be sent as a result of receiving a SAP request.
3.7.2.15 IPX SAP Filter
The IPX SAP Filter is used to remove unwanted server entries from the SAP
table and their propagation to the WAN link. If no filter table entries have
been created and this option is set to YES, the default action is to ignore all
SAP entries.
Once configuration is complete, move the cursor to the
EXIT
position and
press
<return>
.