Filter
Top Products
Echo LANlink Router Option User Manual Issue 1.0 04 December 1997 Page 39 of 59
This is the source IPX network number of the service. Services will not be
entered into the internal SAP table if the RIP table has no entry for the route
to this address.
Node Address
(48 bits)
This is the Ethernet or Token Ring MAC address from where the SAP
originated.
Hops
(16 bits)
This is the number of Routers that must be traversed to reach this service.
Every time this SAP passes another Router this count is incremented to a
maximum of 16.
MENU SELECTION DESCRIPTION
ADD A new entry may be added to the end
of the Table or after an entry
EDIT To edit an entry, selecting the
relevant line number entering
required amendments.
DELETE Enter the line number to delete.
CLEAR To delete the entire table.
NAME Define a name for this filter table
LIST PARAMETER DESCRIPTION
LINE The Line Number of the Filter Table
entry used to specify an entry to be
changed or deleted.
TYPE The type of service advertised by a
SAP packet or ALL to include all
service types in the filter.
FROM SKT Initial Socket Number for selecting a
range of socket numbers to be
filtered. To select all Sockets use
ALL.
TO SKT The final Socket Number for selecting
a range of socket numbers to be
filtered.
SERVER NAME The unique name of a Server to be
filtered or ALL to filter on all Server
Names.
RSLT The action to be taken as a result of
SAP packets meeting filter conditions
e.g. FAIL (drop) or PASS (route.)