Filter
Top Products
Echo LANlink Router Option User Manual Issue 1.0 04 December 1997 Page 25 of 59
routing table. Turning off IP RIP Receive as before will cause other learned
routes to age out after about four minutes.
PARAMETER DESCRIPTION
NETWORK The IP Network number to which this
RIP entry relates.
SUBNET BITS/MASK This shows the subnet mask detected
by the Router.
GATEWAY The IP Address of the next gateway
used in this route to send a packet to
the specified network.
SERVICE The required service that must be
used to reach a specified network.
TIMER This will display the time interval in
seconds, since this routing entry
was last updated. For the attached
Network this will be left blank. For
static IP Routes this will be STATIC.
METRIC This will indicate the number of
nodes passed in the route to the
Network. RIP packets pass on a
value that is incremented at each
node. The metric is used for
selecting the best route if a multiple
route network exists.
4.2.2 IP: ARP TABLE
This table gives the current ARP table for the router.
PARAMETER DESCRIPTION
IP ADDRESS The IP Network number to which this
entry relates.
MAC ADDRESS The MAC Address (Ethernet
Address) associated with an IP
address. If no MAC address is
available “NONE” will be displayed.
TIMER Displays the time interval in seconds
since a routing entry was last
updated. For the attached Network
this will be left blank.