Filter
Top Products
Electro Industries/GaugeTech
Doc # E107706 V1.25 11-2
Q
The Internal Network Option of the Nexus Meter is an extremely versatile communications tool.
· Adheres to IEEE 802.3 ethernet standard using TCP/IP.
· Utilizes simple and inexpensive 10/100BaseT wiring and connections.
· Plugs right into your network using built-in RJ-45 jack.
· Programmable to any IP address, subnet mask and gateway requirements.
· Communicates using the industry standard Modbus/TCP protocol.
Q
With the Internal Network Option, the standard Port 2 on the Nexus 1250/1252 becomes a
“gateway” to allow additional Nexus Meters access via the LAN. Simply connect a daisy chain of
Nexus Meters together via RS-485, each with its own device address and using the same baud rates.
With this option, you can access any of those instruments via the single LAN connection.
Q
The Internal Network Option allows multiple simultaneous connections (via LAN) to the Nexus.
You can access the Nexus with SCADA, MV90 and RTU all at the same time.
Q
The Internal Network Option allows multiple users running Communicator EXT software to access
the meter concurrently.