Filter
Top Products
2
2-2
EMC Fibre Channel with QLogic HBAs in Windows Hosts
Installing and Configuring the HBA Driver
Introduction
The procedure described here was written specifically for the
QLA22xx and QLA23xx families of Fibre Channel HBAs; however,
the procedures for installing the adapter BIOS and Windows drivers
are identical for QLA21xx, QLA22xx, and QLA23xx.
When installing or upgrading the BIOS and drivers, be sure to use the
latest versions supported by EMC. Review the EMC Support Matrix
for the latest information on approved HBAs and drivers.
Also refer to the EMC Host Connectivity Guide for Windows 2000 and
Windows NT, available on Powerlink, for related information.
Downloading
QLogic Drivers and
Firmware
If you need to download the latest HBA driver or firmware:
1. Access
www.qlogic.com.
2. Click Downloads at the left side of the screen.
3. Click the EMC link to the right of OEM-approved
Drivers/Firmware.
4. Find the description of your HBA driver in the Name column of
the table for your HBA model. Then click the Download link in
the associated Download column.
Verifying and
Downloading the
Documentation
To check for the latest revision of this document (and download it if
necessary):
1. Access
www.qlogic.com.
2. Click Downloads at the left side of the screen.
3. Click the EMC link to the right of OEM-approved
Drivers/Firmware.
4. Find the description of your HBA driver in the Name column of
the table for your HBA model. Then click the Readme link in the
associated Description column.