Filter
Top Products
44
MODEL 5081-T SECTION 5.0
DISPLAY AND OPERATION
VARIABLE NAME MNEMONIC FACTORY SETTINGS CUSTOMER SETTINGS
Program Menu
Output
9VURVU
– ___________
4 mA &!O- 0 µS ___________
20 mA $"!O- 20 mS ___________
Hold KQNG 21 mA ___________
Fault IDVNU 22 mA ___________
Dampening GRP 0 samples/second ___________
Test UHTU 04.00 mA ___________
Temperature
UHOR
Auto temperature compensation UDVUQ on ___________
Manual temperature UODP 25.0°C (overridden by auto) ___________
Temperature compensation algorithm /97: ([LPHDS or P9P1) LInEAr ___________
Display
GLTRNDY
Measurement type UYR (/QPG>/ or P-94 or 4/[ CondUC ___________
or 4$<9&[ or 4$<9&4 or /VTU)
Temperature (°C or °F) UHOR C ___________
Output (mA or %) QVURVU Cur ___________
Security Code FQGH 000 ___________
Custom Curve
<1U>:!
!
/V<
U
___________
Reference temperature U!SHI 25.0°C ___________
Range
Measurement range
S-PJ1 Auto ___________
Calibrate Menu
Cell constant /1[[!/QPTU 3.00 ___________
Temperature slope U17:!TN9RH 2.000 ___________
Output Calibration 9>U:>U!/-[ ___________
Diagnose Menu
Diagnose SAMPLE READINGS
(Each segment displays the current value in the transmitter.)
Absolute conductivity -ET 1000 µS ___________
Off Set 9II<U 0.0 µS ___________
Cell constant /1[[!/9P<U 3.00/cm ___________
Temperature slope UTNQRH 2.000 ___________
Software version TQIU A02.09 ___________
Hardware version 4-SG 01 ___________
Show fault warnings 2D>[=< none ___________
TABLE 5-2. Default Settings for Model 5081-T-HT