Filter
Top Products
Setting Basic System Information
90 Enterasys X-Pedition 8000/8600 Getting Started Guide
7. To display the active configuration, enter the system show active-config command. Changes
in the active configuration take effect on the running system but will not be restored following
a reboot.
8. To guarantee that changes are restored following a reboot, you must save the active database to
the Startup configuration file:
a. Ensure that you are in Enable mode by entering the enable command in the CLI.
b. Enter the copy active to startup command. The CLI displays the following message:
c. Enter yes or y to add the active configuration to the Startup configuration file.
Note: You also can save active changes to the Startup configuration file from within Configure
mode by entering the save startup command.
See Activating Configuration Changes and Saving the Configuration File on page 98 for more
information about the scratchpad, active database, and Startup configuration.
Are you sure you want to overwrite the Startup configuration [no]?