Filter
Top Products
SSR-HSSI-02-CK
118 Enterasys X-Pedition 8000/8600 Getting Started Guide
Note: Because neither connector at the ends of the SYS-HSSI-CAB cable is keyed, you can
simply plug either end of the cable into either your SSR-HSSI-02-CK line card or the
remote HSSI CSU/DSU data port.
Figure 38 shows the pin positions in the 50-pin HSSI connector.
Figure 38. 50-pin HSSI connector
The Enterasys SSR-HSSI-02-CK line card uses standard copper twisted-pair cable with identical
50-pin HSSI connectors at each end to attach to a CSU/DSU module.
To attach the segment cables to your SSR-HSSI-02-CK line card:
1. Obtain an Enterasys 50-pin HSSI connector cable (part number SYS-HSSI-CAB) and connect
either end of the HSSI connector cable to the X-Pedition WAN interface you wish to use.
2. Plug the remote end of the connector cable into the HSSI CSU/DSU data port you wish to use.
1
2650
25