Filter
Top Products
Hardware Overview
34 Enterasys X-Pedition 8000/8600 Getting Started Guide
Per-port Link Green The port hardware detects a cable plugged into the port and a
good link is established.
Red
(intermittent)
Indicates that the port received an error during operation.
Red (solid) The port hardware detected a cable plugged into the port,
however, a bad link is established.
Off Indicates that no link from the port exists.
Per-port Rx Green The port’s transceiver received a packet.
Amber The port’s transceiver received a flow-control packet.
Per-port Tx Green The port’s transceiver transmitted a packet.
Amber The port’s transceiver transmitted a flow-control packet.
Per-port AN Green Green – indicates that the line card has auto negotiated the
operating mode of the link between full-duplex and half-
duplex.
Amber
(intermittent)
Amber (intermittent) – indicates that Auto-Negotiation is in
process.
Amber (solid) Indicates a problem with Auto-Negotiation configuration.
Red Indicates an Auto-Negotiation failure. This fault may occur if
the link partner does not support full duplex.
Off Auto-Negotiation was been disabled or the link is down.
Table 7. SSR-GLX70-01-AA and SSR-GLH39-02 line card LEDs (Continued)
LED Condition Description