Filter
Top Products
Displaying Error Logs
7-18
Displaying Error Logs
The AP can display error logs used by support personnel to analyze system faults.
The AP Manager displays the number of times the AP has been reset and the last four error
messages for both the Access Point 2000 and the R2. To see the reset count from the AP
Manager, select the AP in the Managed List field then click the Reset button. To display
the error messages in the AP Manager, click the Troubleshooting button.
The Access Point 2000 console port displays additional error information. To display the
last eight error messages, choose Dump Error Log from the RoamAbout AP Installation
Menu. The error log displays various information, including the current reset count. You
can also display additional error information by choosing Module-Specific Options from
the RoamAbout AP Installation Menu then selecting Dump Error Log.
Pkts 128 to
255 Octets
Total number of packets (including bad packets) received that were between 128 and 255
octets in length inclusive (excluding framing bits but including FCS octets).
Pkts 256 to
511 Octets
Total number of packets (including bad packets) received that were between 256 and 511
octets in length inclusive (excluding framing bits but including FCS octets).
Pkts 512 to
1023 Octets
Total number of packets (including bad packets) received that were between 512 and 1023
octets in length inclusive (excluding framing bits but including FCS octets).
Pkts 1024 to
1518 Octets
Total number of packets (including bad packets) received that were between 1024 and
1518 octets in length inclusive (excluding framing bits but including FCS octets).
Table 7-11: RoamAbout R2 Counters (Cont’d)
Counter Wired Description