Filter
Top Products
1-1
Chapter 1
Wireless Network Configurations
There are three basic RoamAbout wireless network configurations:
• One or more APs connecting wireless clients to a wired network, using the Workgroup
Bridge mode. A wireless client can be any computer with an 802.11 Direct-Sequence
(DS) compliant radio card. This type of network is referred to as a wireless
infrastructure network.
• Two or more APs used as a wireless link connecting wired networks. This is called a
LAN-to-LAN configuration. There are two variations of the RoamAbout LAN-to-LAN
configurations:
— Point-to-Point which connects two wired networks, using the LAN-to-LAN
Endpoint Bridge mode.
— Point-to-Multipoint which can connect multiple wired networks, using the
LAN-to-LAN Multipoint Bridge mode.
• Wireless clients communicating among themselves without a connection to a wired
network. This is called a peer-to-peer or ad-hoc network.
In This Chapter
Information in this chapter is presented as follows:
Topic Page
RoamAbout AP 1-2
RoamAbout PC Card 1-4
Wireless Infrastructure Network 1-6
LAN-to-LAN Configuration 1-9
RoamAbout R2 Configuration Examples 1-13
Ad-Hoc Network 1-15
Optional Antennas 1-16