Filter
Top Products
24 Using Optional Equipment
5. Place the 35mm filmstrip
guide on the document table,
and align it with the ruled edges of
the document table.
6. Close the TPU and begin
scanning.
If you’re using EPSON Scan,
follow these guidelines:
■ Choose either Home Mode or Professional Mode.
■ In Home Mode, choose the correct Document Type (Color Negative Film,
B&W Negative Film, or Positive Film).
■ In Professional Mode, select Transparency as your Document Type, then
select the correct Film Type.
Loading 35mm slides
Follow these steps to load 35mm slides:
1. Load slides in the 35mm slide holder as shown.
Make sure the glossy side of each slide faces down,
and the film emulsion layer faces up.
2. Position the slide holder on
the document table. Align the slide
holder with the ruled edges of the
document table.
3. Close the TPU and begin your scan.
If you’re using EPSON Scan, follow
these guidelines:
■ Choose either Home Mode or
Professional Mode.
■ In Home Mode, choose Positive Film as your Document Type.
■ In Professional Mode, choose Transparency as your Document Type and
Positive Film the Film Type.
1680.book Page 24 Wednesday, April 9, 2003 4:09 PM