Filter
Top Products
46 Solving Problems
The edges of the document aren’t
scanned.
■ Don’t place your document right
up against the edges of the
document table. Allow a little
space (about 2 mm).
■ If colors are patchy or distorted at
the edges of the image, the
document may be too thick, or
there may be outside light
interfering with the scan.
Your image scans at an angle.
Check the position of your document.
It may be placed at an angle on the
document table. Align it so the
horizontal and vertical edges are
carefully aligned with the scales on the
top and side of the document table.
Straight lines in the image come out
jagged.
Make sure the document is aligned
with the scales on the top and side of
the document table.
1680.book Page 46 Wednesday, April 9, 2003 4:09 PM