Filter
Top Products
30 Using Optional Equipment
6. Insert the two installation
screws that came with the
automatic document feeder into
the screw holes, then tighten the
screws with a coin.
7. Remove the protective foam
block from the automatic
document feeder’s mounting
bracket, and then gently close
the automatic document feeder.
8. Attach the automatic document
feeder’s cable to the scanner’s
OPTION connector. Tighten the screws.
9. Close the automatic document feeder.
Remove the foam block
after tightening the
installation screws.
1680.book Page 30 Wednesday, April 9, 2003 4:09 PM