Filter
Top Products
32 Using Optional Equipment
Fixing Paper Jams
If a paper jam occurs, follow these steps to clear it:
1. Open the automatic document feeder’s
cover to determine where the paper
jam occurred.
2. Pull forward on the jam-release lever,
and slowly pull the jammed paper out of
the feeder mechanism. Be careful not to
tear the paper.
3. After removing the jammed paper, close
the document feeder cover. Make sure
the ERROR light is off and the READY
light isn’t flashing before trying to scan.
4. If the error isn’t cleared, turn your
scanner off and then on again. Also,
close EPSON Scan. Don’t restart
EPSON Scan until the green READY light stops flashing.
Note: If you attempt to preview or scan before the scanner is ready, EPSON Scan
may stop responding. If this happens, restart your computer.
1680.book Page 32 Wednesday, April 9, 2003 4:09 PM