Filter
Top Products
36 Maintenance
4. Slide the transportation lock at
the back of the scanner to the
LOCK position.
5. Tape the cover to the scanner.
6. Use the scanner’s original box, or
a similar box with enough
packaging material to prevent
movement inside the box.
Transporting the Transparency Unit
If you have a transparency unit, prepare it for
shipping as follows:
1. Slowly raise the front of the transparency unit to
allow the lamp assembly to slide to the back of
the unit. Wait until the lamp assembly comes
to rest.
2. Reinstall the transparency unit’s shipping screw
in the hole marked CLAMP.
3. Pack the transparency unit in its original box, or use a similar box with enough
packaging material to prevent any movement inside the box.
Locked position
1680.book Page 36 Wednesday, April 9, 2003 4:09 PM