Filter
Top Products
34 Using Optional Equipment
2. Turn the card over so that the component
side is facing down, and insert it in the
optional interface slot.
3. Push gently until the card is firmly seated.
4. Tighten the retaining screws and reconnect
the scanner’s cables.
Now you’re ready to connect the scanner to
your computer.
Connecting the Scanner to Your Computer
Plug one end of the IEEE 1394 cable into the
IEEE 1394 port on the card, and the other end
into an IEEE 1394 (FireWire) port on your
computer.
1680.book Page 34 Wednesday, April 9, 2003 4:09 PM