Filter
Top Products
Press Y and
Enter
to terminate checking if the device produces an
error, or press
N
and
Enter
to repeat the tests regardless of an error.
You see this prompt:
How many times
(1-9999):
Type the number of times you wish to repeat the test, then press
Enter.
The tests for the device now start.
Resuming From an Error
If an error occurs during a test, the test stops at that point, and an
error code and error message appear. If you want to record the
problem, you can print out the message on your printer. You see this
prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error message, press
N
and
Enter.
Before you request a printout, be sure your printer is turned on and
online, and the paper is installed correctly. Then press Y and
Enter.
If the printer is not ready, the following message and prompt appear:
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the problem and press Y and Enter to continue printing, or
press
N
and
Enter
to cancel printing.
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to
the menu.
The program continues after an error in one of the following ways:
l
It returns to the DEVICE LIST, or
l
If you are running multiple tests and are not terminating on an
error, the program repeats the test that caused the error.
C-6
Performing System Diagnostics