Filter
Top Products
Vigor3300 Series User’s Guide
117
Timeout
several seconds but not finish the complete dialing. The
system will force to dial the incomplete number after the time
you set in this field to finish that call. For example, the phone
number is 03654321 and the dialing completion timeout is set
to 4 (secs). The user dials with 036 and stops to dial. After
passing through 4 seconds, the router will send out that phone
call automatically.
VoIP ToS The ToS value in VoIP protocol packet. The default setting is
0xa0.
Line Polarity Reversal as
Callee Answer
Check this box to generate line polarity reversal while the
remote user picks up the phone call.
FXO auto disconnection if
no packet is received in X
minutes
Determine the time length for the FXO disconnecting
automatically when there is no packet received.
Ringing Frequency Please select a proper setting as the ringing frequency.
Ringing Cadence - On Determines the length of the ringing time for incoming calls.
Ringing Cadence - Off Determines the length for the incoming calls to stop ringing.
3
3
.
.
7
7
.
.
6
6
T
T
o
o
n
n
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
This setting is provided for fitting the telecommunication custom for the local area of the
router installed. Wrong tone settings might cause inconvenience for users. To set the sound
pattern of the phone set, simply choose a proper region to let the system find out the preset
tone settings and caller ID type automatically. Or you can adjust tone settings manually if you
choose User Defined. TOn1, TOff1, TOn2 and TOff2 mean the cadence of the tone pattern.
TOn1 and TOn2 represent sound-on; TOff1 and TOff2 represent the sound-off.