Filter
Top Products
Vigor3300 Series User’s Guide
91
Priority You are allowed to set ten filters. The priority for the filter of
number 1 is the highest; and the priority for number 10 is the
lowest.
Source IP Displays the source IP address for the filter.
Destination IP Displays the destination IP address for the filter.
Service Type Status Displays the service type that you choose for the filter.
DiffServ CodePoint Status Displays the setting for DiffServ CodePoint.
Class Displays the class name that you specified for the
incoming/outgoing class filter.
Edit Click this button to open the edit page for adjusting the settings.
Delete/Delete All Click this button to delete the selected setting or all settings.
To edit an incoming class filter, please choose one of the radio buttons under Priority and click
Edit. The following page will be shown automatically.
Source IP Type the source IP address with subnet mask value to be
applied for this filter.
Destination IP Type the destination IP address with subnet mask value to be
applied for this filter.
Service Type Status There are three options for you to choose:
Basic – Only the Service Type field is allowed to be configured.
Advanced – The Protocol and Port fields are allowed to be
configured.
None – No field is allowed to be configured.