Filter
Top Products
Vigor3300 Series User’s Guide
154
the PVID (Port VLAN ID), because 802.1q tag will be inserted to the frame from the
switch.
6. In the VLAN8, type “8” to VLAN ID. In the Member field, choose p1, p2, p3 and p4.
Then choose the “Tagged” for Frame Tag Operation in p1, p2, p3 and p4. We can ignore
the PVID (Port VLAN ID), because 802.1q tag will be inserted to the frame from some
users.
7. After applying the settings, the web page will be redirected to “reboot” web page. User
can ignore it and continue to configure the Network setting. After finishing Network
setting, you can execute the reboot procedure.
8. After rebooting, the tagged ports will communicate with 802.1Q tagged devices only.
9. The network configuration is the same with A.2.1. Please refer to A.2.1 part.