Filter
Top Products
Vigor3300 Series User’s Guide
19
IP Address Assign an IP address for the LAN interface.
Subnet Mask Assign the subnet mask for the LAN interface.
Status Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Start IP Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
End IP Assign the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Primary DNS Type the IP address for primary DNS.
When you finished the above required settings, please click Finish. A system reboot page will
appear. Click Apply to activate the PPPoE mode configuration.